Apache HTTP Server Version 2.5
Apache HTTP Server Version 2.5
| Description: | User authentication using MD5 Digest Authentication |
|---|---|
| Status: | Extension |
| Module Identifier: | auth_digest_module |
| Source File: | mod_auth_digest.c |
This module implements HTTP Digest Authentication
(RFC2617), and
provides an alternative to mod_auth_basic where the
password is not transmitted as cleartext. However, this does
not lead to a significant security advantage over
basic authentication. On the other hand, the password storage on the
server is much less secure with digest authentication than with
basic authentication. Therefore, using basic auth and encrypting the
whole connection using mod_ssl is a much better
alternative.
AuthDigestAlgorithm AuthDigestDomain AuthDigestNcCheck AuthDigestNonceFormat AuthDigestNonceLifetime AuthDigestProvider AuthDigestQop AuthDigestShmemSize
To use MD5 Digest authentication, configure the location to be protected as shown in the below example:
<Location "/private/">
AuthType Digest
AuthName "private area"
AuthDigestDomain "/private/" "http://mirror.my.dom/private2/"
AuthDigestProvider file
AuthUserFile "/web/auth/.digest_pw"
Require valid-user
</Location>
AuthDigestDomain
should list the locations that will be protected by this
configuration.
The password file referenced in the AuthUserFile directive may be
created and managed using the htdigest tool.
Digest authentication was intended to be more secure than basic
authentication, but no longer fulfills that design goal. A
man-in-the-middle attacker can trivially force the browser to downgrade
to basic authentication. And even a passive eavesdropper can brute-force
the password using today's graphics hardware, because the hashing
algorithm used by digest authentication is too fast. Another problem is
that the storage of the passwords on the server is insecure. The contents
of a stolen htdigest file can be used directly for digest authentication.
Therefore using mod_ssl to encrypt the whole connection is
strongly recommended.
mod_auth_digest only works properly on platforms
where APR supports shared memory.
| Description: | Selects the algorithm used to calculate the challenge and response hashes in digest authentication |
|---|---|
| Syntax: | AuthDigestAlgorithm MD5|MD5-sess |
| Default: | AuthDigestAlgorithm MD5 |
| Context: | directory, .htaccess |
| Override: | AuthConfig |
| Status: | Extension |
| Module: | mod_auth_digest |
The AuthDigestAlgorithm directive
selects the algorithm used to calculate the challenge and response
hashes.
MD5-sess is not correctly implemented yet.
| Description: | URIs that are in the same protection space for digest authentication |
|---|---|
| Syntax: | AuthDigestDomain URI [URI] ... |
| Context: | directory, .htaccess |
| Override: | AuthConfig |
| Status: | Extension |
| Module: | mod_auth_digest |
The AuthDigestDomain directive allows
you to specify one or more URIs which are in the same protection
space (i.e. use the same realm and username/password info).
The specified URIs are prefixes; the client will assume
that all URIs "below" these are also protected by the same
username/password. The URIs may be either absolute URIs (i.e.
including a scheme, host, port, etc.) or relative URIs.
This directive should always be specified and
contain at least the (set of) root URI(s) for this space.
Omitting to do so will cause the client to send the
Authorization header for every request sent to this
server. Apart from increasing the size of the request, it may
also have a detrimental effect on performance if AuthDigestNcCheck is on.
The URIs specified can also point to different servers, in which case clients (which understand this) will then share username/password info across multiple servers without prompting the user each time.
| Description: | Enables or disables checking of the nonce-count sent by the server |
|---|---|
| Syntax: | AuthDigestNcCheck On|Off |
| Default: | AuthDigestNcCheck Off |
| Context: | server config |
| Status: | Extension |
| Module: | mod_auth_digest |
| Description: | Determines how the nonce is generated |
|---|---|
| Syntax: | AuthDigestNonceFormat format |
| Context: | directory, .htaccess |
| Override: | AuthConfig |
| Status: | Extension |
| Module: | mod_auth_digest |
| Description: | How long the server nonce is valid |
|---|---|
| Syntax: | AuthDigestNonceLifetime seconds |
| Default: | AuthDigestNonceLifetime 300 |
| Context: | directory, .htaccess |
| Override: | AuthConfig |
| Status: | Extension |
| Module: | mod_auth_digest |
The AuthDigestNonceLifetime directive
controls how long the server nonce is valid. When the client
contacts the server using an expired nonce the server will send
back a 401 with stale=true. If seconds is
greater than 0 then it specifies the amount of time for which the
nonce is valid; this should probably never be set to less than 10
seconds. If seconds is less than 0 then the nonce never
expires.
| Description: | Sets the authentication provider(s) for this location |
|---|---|
| Syntax: | AuthDigestProvider provider-name
[provider-name] ... |
| Default: | AuthDigestProvider file |
| Context: | directory, .htaccess |
| Override: | AuthConfig |
| Status: | Extension |
| Module: | mod_auth_digest |
The AuthDigestProvider directive sets
which provider is used to authenticate the users for this location.
The default file provider is implemented
by the mod_authn_file module. Make sure
that the chosen provider module is present in the server.
See mod_authn_dbm, mod_authn_file,
mod_authn_dbd and mod_authn_socache
for providers.
| Description: | Determines the quality-of-protection to use in digest authentication |
|---|---|
| Syntax: | AuthDigestQop none|auth|auth-int [auth|auth-int] |
| Default: | AuthDigestQop auth |
| Context: | directory, .htaccess |
| Override: | AuthConfig |
| Status: | Extension |
| Module: | mod_auth_digest |
The AuthDigestQop directive determines
the quality-of-protection to use. auth will
only do authentication (username/password); auth-int is
authentication plus integrity checking (an MD5 hash of the entity
is also computed and checked); none will cause the module
to use the old RFC-2069 digest algorithm (which does not include
integrity checking). Both auth and auth-int may
be specified, in which the case the browser will choose which of
these to use. none should only be used if the browser for
some reason does not like the challenge it receives otherwise.
auth-int is not implemented yet.
| Description: | The amount of shared memory to allocate for keeping track of clients |
|---|---|
| Syntax: | AuthDigestShmemSize size |
| Default: | AuthDigestShmemSize 1000 |
| Context: | server config |
| Status: | Extension |
| Module: | mod_auth_digest |
The AuthDigestShmemSize directive defines
the amount of shared memory, that will be allocated at the server
startup for keeping track of clients. Note that the shared memory
segment cannot be set less than the space that is necessary for
tracking at least one client. This value is dependent on your
system. If you want to find out the exact value, you may simply
set AuthDigestShmemSize to the value of
0 and read the error message after trying to start the
server.
The size is normally expressed in Bytes, but you
may follow the number with a K or an M to
express your value as KBytes or MBytes. For example, the following
directives are all equivalent:
AuthDigestShmemSize 1048576 AuthDigestShmemSize 1024K AuthDigestShmemSize 1M