Apache HTTP Server Version 2.0
This document refers to the 2.0 version of Apache httpd, which is no longer maintained. Upgrade, and refer to the current version of httpd instead, documented at:
You may follow this link to go to the current version of this document.
.htaccess
files provide a way to make configuration
changes on a per-directory basis.
Related Modules | Related Directives |
---|---|
.htaccess
files (or "distributed configuration files")
provide a way to make configuration changes on a per-directory basis. A
file, containing one or more configuration directives, is placed in a
particular document directory, and the directives apply to that
directory, and all subdirectories thereof.
If you want to call your .htaccess
file something
else, you can change the name of the file using the AccessFileName
directive. For example,
if you would rather call the file .config
then you
can put the following in your server configuration file:
AccessFileName .config
In general, .htaccess
files use the same syntax as
the main configuration
files. What you can put in these files is determined by the
AllowOverride
directive. This
directive specifies, in categories, what directives will be
honored if they are found in a .htaccess
file. If a
directive is permitted in a .htaccess
file, the
documentation for that directive will contain an Override section,
specifying what value must be in AllowOverride
in order for that
directive to be permitted.
For example, if you look at the documentation for the AddDefaultCharset
directive, you will find that it is permitted in .htaccess
files. (See the Context line in the directive summary.) The Override line reads
FileInfo
. Thus, you must have at least
AllowOverride FileInfo
in order for this directive to be
honored in .htaccess
files.
If you are unsure whether a particular directive is permitted in a
.htaccess
file, look at the documentation for that
directive, and check the Context line for ".htaccess".
In general, you should never use .htaccess
files unless
you don't have access to the main server configuration file. There is,
for example, a prevailing misconception that user authentication should
always be done in .htaccess
files. This is simply not the
case. You can put user authentication configurations in the main server
configuration, and this is, in fact, the preferred way to do
things.
.htaccess
files should be used in a case where the
content providers need to make configuration changes to the server on a
per-directory basis, but do not have root access on the server system.
In the event that the server administrator is not willing to make
frequent configuration changes, it might be desirable to permit
individual users to make these changes in .htaccess
files
for themselves. This is particularly true, for example, in cases where
ISPs are hosting multiple user sites on a single machine, and want
their users to be able to alter their configuration.
However, in general, use of .htaccess
files should be
avoided when possible. Any configuration that you would consider
putting in a .htaccess
file, can just as effectively be
made in a <Directory>
section in your main server
configuration file.
There are two main reasons to avoid the use of
.htaccess
files.
The first of these is performance. When AllowOverride
is set to allow the use of .htaccess
files, Apache will
look in every directory for .htaccess
files. Thus,
permitting .htaccess
files causes a performance hit,
whether or not you actually even use them! Also, the
.htaccess
file is loaded every time a document is
requested.
Further note that Apache must look for .htaccess
files
in all higher-level directories, in order to have a full complement of
directives that it must apply. (See section on how
directives are applied.) Thus, if a file is requested out of a
directory /www/htdocs/example
, Apache must look for the
following files:
/.htaccess
/www/.htaccess
/www/htdocs/.htaccess
/www/htdocs/example/.htaccess
And so, for each file access out of that directory, there are 4
additional file-system accesses, even if none of those files are
present. (Note that this would only be the case if
.htaccess
files were enabled for /
, which
is not usually the case.)
The second consideration is one of security. You are permitting
users to modify server configuration, which may result in changes over
which you have no control. Carefully consider whether you want to give
your users this privilege. Note also that giving users less
privileges than they need will lead to additional technical support
requests. Make sure you clearly tell your users what level of
privileges you have given them. Specifying exactly what you have set
AllowOverride
to, and pointing them
to the relevant documentation, will save yourself a lot of confusion
later.
Note that it is completely equivalent to put a .htaccess
file in a directory /www/htdocs/example
containing a
directive, and to put that same directive in a Directory section
<Directory /www/htdocs/example>
in your main server
configuration:
.htaccess
file in /www/htdocs/example
:
/www/htdocs/example
AddType text/example .exm
httpd.conf
file
<Directory /www/htdocs/example>
AddType text/example .exm
</Directory>
However, putting this configuration in your server configuration file will result in less of a performance hit, as the configuration is loaded once when Apache starts, rather than every time a file is requested.
The use of .htaccess
files can be disabled completely
by setting the AllowOverride
directive to none
:
AllowOverride None
The configuration directives found in a .htaccess
file
are applied to the directory in which the .htaccess
file
is found, and to all subdirectories thereof. However, it is important
to also remember that there may have been .htaccess
files
in directories higher up. Directives are applied in the order that they
are found. Therefore, a .htaccess
file in a particular
directory may override directives found in .htaccess
files
found higher up in the directory tree. And those, in turn, may have
overridden directives found yet higher up, or in the main server
configuration file itself.
Example:
In the directory /www/htdocs/example1
we have a
.htaccess
file containing the following:
Options +ExecCGI
(Note: you must have "AllowOverride Options
" in effect
to permit the use of the "Options
" directive in
.htaccess
files.)
In the directory /www/htdocs/example1/example2
we have
a .htaccess
file containing:
Options Includes
Because of this second .htaccess
file, in the directory
/www/htdocs/example1/example2
, CGI execution is not
permitted, as only Options Includes
is in effect, which
completely overrides any earlier setting that may have been in
place.
As discussed in the documentation on Configuration Sections,
.htaccess
files can override the <Directory>
sections for
the corresponding directory, but will be overriden by other types
of configuration sections from the main configuration files. This
fact can be used to enforce certain configurations, even in the
presence of a liberal AllowOverride
setting. For example, to
prevent script execution while allowing anything else to be set in
.htaccess
you can use:
<Directory />
Allowoverride All
</Directory>
<Location />
Options +IncludesNoExec -ExecCGI
</Location>
If you jumped directly to this part of the document to find out how
to do authentication, it is important to note one thing. There is a
common misconception that you are required to use
.htaccess
files in order to implement password
authentication. This is not the case. Putting authentication directives
in a <Directory>
section, in your main server configuration file, is the preferred way
to implement this, and .htaccess
files should be used only
if you don't have access to the main server configuration file. See above for a discussion of when you should and should
not use .htaccess
files.
Having said that, if you still think you need to use a
.htaccess
file, you may find that a configuration such as
what follows may work for you.
You must have "AllowOverride AuthConfig
" in effect for
these directives to be honored.
.htaccess
file contents:
AuthType Basic
AuthName "Password Required"
AuthUserFile /www/passwords/password.file
AuthGroupFile /www/passwords/group.file
Require Group admins
Note that AllowOverride AuthConfig
must be in effect
for these directives to have any effect.
Please see the authentication tutorial for a more complete discussion of authentication and authorization.
Another common use of .htaccess
files is to enable
Server Side Includes for a particular directory. This may be done with
the following configuration directives, placed in a
.htaccess
file in the desired directory:
Options +Includes
AddType text/html shtml
AddHandler server-parsed shtml
Note that AllowOverride Options
and AllowOverride
FileInfo
must both be in effect for these directives to have any
effect.
Please see the SSI tutorial for a more complete discussion of server-side includes.
Finally, you may wish to use a .htaccess
file to permit
the execution of CGI programs in a particular directory. This may be
implemented with the following configuration:
Options +ExecCGI
AddHandler cgi-script cgi pl
Alternately, if you wish to have all files in the given directory be considered to be CGI programs, this may be done with the following configuration:
Options +ExecCGI
SetHandler cgi-script
Note that AllowOverride Options
and AllowOverride
FileInfo
must both be in effect for these directives to have any
effect.
Please see the CGI tutorial for a more complete discussion of CGI programming and configuration.
When you put configuration directives in a .htaccess
file, and you don't get the desired effect, there are a number of
things that may be going wrong.
Most commonly, the problem is that AllowOverride
is not
set such that your configuration directives are being honored. Make
sure that you don't have a AllowOverride None
in effect
for the file scope in question. A good test for this is to put garbage
in your .htaccess
file and reload. If a server error is
not generated, then you almost certainly have AllowOverride
None
in effect.
If, on the other hand, you are getting server errors when trying to
access documents, check your Apache error log. It will likely tell you
that the directive used in your .htaccess
file is not
permitted. Alternately, it may tell you that you had a syntax error,
which you will then need to fix.